New Products At Turbo Tech Racing! [Archive] - G5CLUB.net Forums

: New Products At Turbo Tech Racing!



TurboTechRacing
02-02-2011, 01:23 PM
New for 2011!

Ecotec Intake Manifold:

http://www.turbotechracing.com/productcart/pc/catalog/1_627_detail.jpg

Turbo Tech Racing Ecotec Intake Manifold - Turbo Tech Racing, LLC (http://www.turbotechracing.com/productcart/pc/viewPrd.asp?idproduct=5340&idcategory=)

Ecotec T3 Turbo Exhaust Manifold:

http://www.turbotechracing.com/productcart/pc/catalog/5_675_detail.jpg

Turbo Tech Racing Ecotec T3 Turbo Exhaust Manifold - Turbo Tech Racing, LLC (http://www.turbotechracing.com/productcart/pc/viewPrd.asp?idproduct=5341&idcategory=)



Low intro. prices as shown!

chrisdordon
02-02-2011, 01:36 PM
how serious of a throttle body relocation is going to be needed...

TurboTechRacing
02-02-2011, 01:41 PM
how serious of a throttle body relocation is going to be needed...

Right now it faces up between cylinder #2 and #3. It will be relocated as shown (Drivers side). Basically 2.2/2.4L members will use a 2.0L SS/SC intake system, which will be a fairly close to what is needed.

ConcreteGrub
02-02-2011, 01:47 PM
How much power would it give a NA engine

TurboTechRacing
02-02-2011, 01:54 PM
A completely stock car with just this manifold? Honestly not sure how many would jump right into this.

If you have an intake, header/downpipe, exhaust and a GOOD tune you should get a good 10-15 top end HP out of this, over the stock 2.2L manifold. (best estimate)

ConcreteGrub
02-02-2011, 02:03 PM
2008 2.2L with a header back exhaust, k&N intake, trifecta tune and the 2.4 intake manifold

TurboTechRacing
02-02-2011, 02:04 PM
2008 2.2L with a header back exhaust, k&N intake, trifecta tune and the 2.4 intake manifold

Really depends on the tune, I wish I could say exactly, however the best range we could give is as stated above. This was tested on a high boost cobalt, pushing over 400 HP :)

TurboTechRacing
02-02-2011, 05:56 PM
Bump for night crew.

utsadude
02-02-2011, 07:52 PM
Why do you do this to me???

I get ready to sell the car and you release exactly what I wanted to finish the turbo build... FML...

TurboTechRacing
02-02-2011, 07:56 PM
Why do you do this to me???

I get ready to sell the car and you release exactly what I wanted to finish the turbo build... FML...

Sorry... I am sure you are not the only one. We had request after request for these items.

utsadude
02-02-2011, 07:59 PM
Oh well. I still want to get rid of this junker. So GLWS.

TurboTechRacing
02-16-2011, 06:44 PM
Intro price is just about over... Order soon.

USMCFieldMP
02-16-2011, 08:27 PM
Do you guys make these in-house? Or do you have the work contracted out? Length and Width of the Runners? Volume of the Plenum?

TurboTechRacing
02-17-2011, 09:37 AM
Do you guys make these in-house? Or do you have the work contracted out? Length and Width of the Runners? Volume of the Plenum?

Built in house we contract NOTHING out on these. Runners are same side as the ports (custom oval runner profile) and they are 4" long.

~220 cubic inch plenum.

TurboTechRacing
03-08-2011, 01:11 PM
Bump for more views!

TurboTechRacing
01-20-2012, 02:35 PM
More shipping!

TurboTechRacing
04-10-2012, 02:50 PM
Any questions, let us know.

TurboTechRacing
04-23-2012, 09:40 AM
On sale for a limited time, price shown on our site is the new sale price.