The Old Exhaust is officially dead, hole through the inside that I cant quite get a pic of, but here's it cut up. We're working on welding up the new stuff now
Weekend Work - The 'Gremlin' Saga
Got Gremlin out to my guy so we could do some work.
Maintenance:
Oil n Filter
Trans Fluid n Filter & Fix Pan Dent
Front Calipers
Misc:
Front Door Speakers
Fixing Antenna Cable
Repaint Rims
07 SS Rear Valance
Did fluids already. Will add more pics as we do stuff
Maintenance:
Oil n Filter
Trans Fluid n Filter & Fix Pan Dent
Front Calipers
Misc:
Front Door Speakers
Fixing Antenna Cable
Repaint Rims
07 SS Rear Valance
Did fluids already. Will add more pics as we do stuff
Attachments
21 - 40 of 48 Posts
Finished up the front part, gonna have to finish the after axle later but this will work for now
![Wood Gas Tints and shades Ceiling Space]()
![Tire Automotive tire Hood Automotive lighting Vehicle]()
Almost done, just 1 more hanger
![Tire Wheel Vehicle Car Automotive tire]()
Did the 2nd battery wiring on Sunday, took way longer than it should've but heres the fire hazard atm. Still gotta wire the Amp, get a vent tube for the 2nd battery and neaten everything up
![Motor vehicle Trunk Automotive lighting Gas Automotive exterior]()
Got a new SS gauge cluster in over the weekend.
![Speedometer Trip computer Odometer Automotive lighting Tachometer]()
Also got my amp wired over the weekend but haven't taken any pics yet since we got done so late
Also got my amp wired over the weekend but haven't taken any pics yet since we got done so late
Went on an adventure this weekend for some stuff. Lookie what we got here
![Wood Gas Hardwood Trigger Machine]()
Cleaning up some rust, here's some WIP
![Tire Wheel Vehicle Hood Automotive lighting]()
![Tire Wheel Car Motor vehicle Automotive lighting]()
Just another light coat or 2 of gloss but pretty much done. Still alittle blemishy but its good enough
![Tire Wheel Vehicle Car Automotive tire]()
More bodywork, currently sanding the hood
![Car Vehicle Grille Hood Automotive lighting]()
![Car Vehicle Automotive parking light Automotive lighting Hood]()
![Automotive parking light Car Grille Vehicle Automotive lighting]()
Last pass before painting
![Tire Land vehicle Car Wheel Motor vehicle]()
High Build Filler+Primer, Smoothed out
![Tire Wheel Car Hood Vehicle]()
3-4 light-mid coats in Sunburst Copper.
![Wood Gas Automotive tire Sculpture Flooring]()
Wait, that's the wrong color.
Yes I am aware, but due to not having alot left of my Sunburst Orange II, I'm using a similar enough color and blending the topcoat to match
Pre-Wet Sand Blending, looks pretty close in color to me. Hard to see the spray irregularities in the photo but theyre there
![Car Tire Wheel Motor vehicle Vehicle]()
High Build Filler+Primer, Smoothed out
3-4 light-mid coats in Sunburst Copper.
Wait, that's the wrong color.
Yes I am aware, but due to not having alot left of my Sunburst Orange II, I'm using a similar enough color and blending the topcoat to match
Pre-Wet Sand Blending, looks pretty close in color to me. Hard to see the spray irregularities in the photo but theyre there
Blended as well as im gonna get her, clear gloss time. I can still see some unbalance but only if im up close and looking
![Hood Rectangle Automotive lighting Tints and shades Fender]()
Just 1 more light gloss, but she's pretty much done. The gloss helps hide some of the unbalanced areas
![Hood Vehicle Car Vehicle registration plate Wood]()
Just 1 more light gloss, but she's pretty much done. The gloss helps hide some of the unbalanced areas
Fixing up the Mid-Rise Wing, she had some nicks and cracks.
![Plant Wood Tool Gas Blade]()
![Table Wood Gas Bench Knife]()
Remember my pretty colorful cluster? Well here's a revamp, since almost all the purples blew.
![Green Circuit component Urban design Engineering Computer hardware]()
Remember kids, don't solder in crap to save money. You'll be stuck resoldering it when it fails
![Circuit component Passive circuit component Hardware programmer Font Electronic component]()
And double check for shorts, 99% you wont get lucky enough for the traces to stay intact. And you really dont want to fix them
Here's lowest and highest brightness
![Speedometer Automotive lighting Tachometer Odometer Gauge]()
![Automotive lighting Speedometer Light Purple Vision care]()
Remember kids, don't solder in crap to save money. You'll be stuck resoldering it when it fails
And double check for shorts, 99% you wont get lucky enough for the traces to stay intact. And you really dont want to fix them
Here's lowest and highest brightness
Some more WIP on the wing. A base layer of Matte Black over Filler Primer.
![Wood Bumper Automotive exterior Automotive wheel system Gas]()
Doing a base in Metallic Copper on the middle before I Sunburst Copper it
![Wood Automotive exterior Automotive tire Bumper Auto part]()
Just has to get some gloss now but practically done
![Motor vehicle Bumper Wood Automotive exterior Asphalt]()
![Automotive lighting Tire Wheel Automotive tire Bumper]()
Doing a base in Metallic Copper on the middle before I Sunburst Copper it
Just has to get some gloss now but practically done
More spoiler work.
Finished blending the wing
![Table Wood Road surface Bumper Outdoor furniture]()
Removed the old spoiler and filling
![Automotive tail & brake light Automotive lighting Hood Motor vehicle Vehicle]()
Waaay too long later thx to uncooperative primer
![Hood Motor vehicle Wood Automotive exterior Automotive lighting]()
Finished blending the wing
Removed the old spoiler and filling
Waaay too long later thx to uncooperative primer
After much aggravation, mysterious paint nicks and uncooperative bolts, the wing is mounted. 'New' Emblem is mounted too. Just waiting for the goop to dry
![Wheel Tire Car Land vehicle Automotive tail & brake light]()
After running around with her a bit, I can definitely feel the difference between this, no wing, and the low rise. Its not much, kinda feels like the difference between an empty tank n a full tank of gas, but it's noticeable enough
After running around with her a bit, I can definitely feel the difference between this, no wing, and the low rise. Its not much, kinda feels like the difference between an empty tank n a full tank of gas, but it's noticeable enough
21 - 40 of 48 Posts
